Emerson Bearing - MR Series Heavy Duty Needle Roller Bearings with Seals and Inner Rings

Providing Market and Industry
Specific Solutions for Bearing
Needs Worldwide

PRODUCTS Ball Bearings Roller Bearings Mounted Units Oil Seals Roller Chain/ Leaf Chain Cam Followers/Yoke Rollers Rod Ends/Spherical Bushings Linear Motion Bearing Accessories Industry SolutionsNews/ArticlesVideo TutorialsEmerson Bearing Co.
View RFQ's
 Request for Quote  0 Items 
All Categories > Bearing Accessories > Adhesives, Sealants and Aerosols > Anaerobic Threadlockers > Solution 12 High Strength Green Penetrating Threadlocker > Solution 10 Medium Strength Blue Threadlocker > Solution 11 High Strength Red Threadlocker > Solution 15 Low Strength Purple Screwlocker > Solution 1000 Food Grade Antiseize > Solution 1800 General Purpose Antiseize > Solution 2600 Premium Nickel Antiseize > Solution 800 Low Friction Moly Past Lubricant > Mast Guide Ball Bearings > 51100 Series Extra Light Duty Ball Thrust Ball Bearings > HR-BC, HR-XBC Heavy Stud Crowned Hex Slot Cam Followers > CR-B, CR-XB Hex Slot Cam Followers > CR, CR-X Screwdriver Slot Cam Followers > CR-XBE Eccentric Stud Hex Slot Cam Followers > HR-B, HR-XB Heavy Stud Hex Slot Cam Followers > MCR, MCR-S, MCRV, MCRV-S Metric Cam Followers > MUTD Metric Double Row Yoke Rollers > CR-XBEC Eccentric Stud Crowned Hex Slot Cam Followers > KP Series Control Ball Bearings > KSP, KSP-A Series Control Ball Bearings > 6300 Series Deep Groove Radial Ball Bearings > Type E 2-Bolt Heavy Duty Mounted Units > Type E 4-Bolt Heavy Duty Mounted Units > Type E Piloted Flange Heavy Duty Mounted Units > MR Series Heavy Duty Needle Roller Bearings without Inner Ring > MR Series Heavy Duty Needle Roller Bearings with Seals and Inner Rings > View Items 
    Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

MR Series Heavy Duty Needle Roller Bearings with Seals and Inner Rings

 
Check up to five results to perform an action.

outer ring assembly

larger image 		Outer ring and roller assembly with separable inner ring
For a complete bearing, specify both outer and inner, as each is packed and shipped separately. Consult McGill Engineering Department for additional information on CAGEROL® bearing sizes not listed as available with seals. The suffix "SS" indicates double seals with lips turned in (illustrated at right). This construction is most common and is intended primarily for lubrication retention. For other seal combinations.

Search Items


Request InformationCompare Items   Results Per Page : 
  Results 1 - 25 of 42 Unit of Measure: Imperial 1 2 

Inner Ring Part No.

(B) Dimension

(D) Dimension

(W) Dimension

(H) Hole Dia.

Stationary Shaft Dia.

Rotating Shaft Dia.

Complete Assembly Item #

MI-6 0.3750 in 1.1250 in 1.000 in 5/64 in 0.3747 in 0.3755 in MR-10-SS
MI-8 1/2 in 1-1/4 in 1.000 in 5/64 in 0.4997 in 0.5005 in MR-12-SS
MI-10 0.6250 in 1.3750 in 1.000 in 5/64 in 0.6247 in 0.6255 in MR-14-SS
MI-12 0.8125 in 1-1/2 in 1.000 in 5/64 in 0.7497 in 0.7505 in MR-16-SS
MI-13 0.8125 in 1-1/2 in 1.000 in 5/64 in 0.8121 in 0.8129 in MR-16-SS
MI-14 0.9375 in 1- 5/8 in 1.250 in 3/32 in 0.8746 in 0.8754 in MR-18-SS
MI-15 0.9375 in 1- 5/8 in 1.250 in 3/32 in 0.9371 in 0.9379 in MR-18-SS
MI-16 1.0000 in 1-3/4 in 1.250 in 3/32 in 0.9996 in 1.0004 in MR-20-SS
MI-17 1.0625 in 1.8750 in 1.250 in 3/32 in 1.0621 in 1.0630 in MR-22-SS
MI-18 1.1250 in 1.8750 in 1.250 in 3/32 in 1.1246 in 1.1255 in MR-22-SS
MI-19 1.1875 in 2.0625 in 1.250 in 3/32 in 1.1871 in 1.1880 in MR-24-SS
MI-20 1.2500 in 2.0625 in 1.250 in 3/32 in 1.2496 in 1.2505 in MR-24-SS
MI-21 1.3125 in 2.1875 in 1.250 in 3/32 in 1.3121 in 1.3130 in MR-26-SS
MI-22-4S 1.3750 in 2.1875 in 1.250 in 3/32 in 1.3746 in 1.3755 in MR-26-SS
MI-22 1.3750 in 2.3125 in 1.250 in 3/32 in 1.3746 in 1.3755 in MR-28-SS
MI-23 1.4375 in 2.3125 in 1.250 in 3/32 in 1.4371 in 1.4380 in MR-28-SS
MI-24 1.5000 in 2.3125 in 1.250 in 3/32 in 1.4996 in 1.5005 in MR-28-SS
MI-25-4S 1.5625 in 2.4375 in 1.250 in 3/32 in 1.5621 in 1.5630 in MR-30-SS
MI-25 1.5625 in 2.5625 in 1.250 in 3/32 in 1.5621 in 1.5630 in MR-32-SS
MI-26 1.6250 in 2.5625 in 1.250 in 3/32 in 1.6246 in 1.6255 in MR-32-SS
MI-27 1.6875 in 2.5625 in 1.250 in 3/32 in 1.6371 in 1.6880 in MR-32-SS
Ml-28 1.7500 in 3.0000 in 1.750 in 1/8 in 1.7496 in 1.7505 in MR-36-SS
MI-30 1.8750 in 3.0000 in 1.750 in 1/8 in 1.8746 in 1.8755 in MR-36-SS
MI-31 1.9375 in 3.2500 in 1.750 in 1/8 in 1.9371 in 1.9380 in MR-40-SS
MI-32 2.0000 in 3.2500 in 1.750 in 1/8 in 1.9996 in 2.0005 in MR-40-SS
  Results 1 - 25 of 42 1 2 
New England Customer?
Click here »Visa, Mastercard, American Express and Discover Accepted
Visa, Mastercard, American
Express and Discover Accepted
Se Habla Español
Copyright - 2009 Emerson Bearing CompanySite created by ThomasNet Web Solutions and powered by Navigator Platform