Outer ring and roller assembly with separable inner ring
For a complete bearing, specify both outer and inner, as each is packed and shipped separately. Consult McGill Engineering Department for additional information on CAGEROL® bearing sizes not listed as available with seals. The suffix "SS" indicates double seals with lips turned in (illustrated at right). This construction is most common and is intended primarily for lubrication retention. For other seal combinations.
Unit of Measure

(B) Dimension

N/A 1.6875 in

(B) Dimension Tolerance

N/A +0.0000/-0.0005

(D) Dimension

N/A 2.5625 in

(D) Dimension Tolerance

N/A +0.0000/-0.0006

(W) Dimension

N/A 1.250 in

(W1) Dimension

N/A 1.260

(H) Hole Dia.

N/A 3/32 in

(R) Max. Fillet for Shaft & Housing

N/A 0.060

Stationary Shaft Dia.

N/A 1.6371 in

Stationary Housing Bore Dia. Tolerance

N/A +0.0000/-0.0007

Rotating Shaft Dia.

N/A 1.6880 in

Rotating Shaft Dia. Tolerance

N/A +0.0000/-0.0005

Stationary Housing Bore Dia.

N/A 2.5632 in

Stationary Shaft Dia. Tolerance

N/A +0.0000/-0.0005

Rotating Housing Bore Dia.

N/A 2.5621 in

Rotating Housing Bore Dia. Tolerance

N/A +0.0000/-0.0007

Static Load Rating

N/A 20700 lb

Basic Dynamic Rating

N/A 12000 lb

Complete Assembly Item #

N/A MR-32-SS