Outer ring and roller assembly with separable inner ring
For a complete bearing, specify both outer and inner, as each is packed and shipped separately. Consult McGill Engineering Department for additional information on CAGEROL® bearing sizes not listed as available with seals. The suffix "SS" indicates double seals with lips turned in (illustrated at right). This construction is most common and is intended primarily for lubrication retention. For other seal combinations.
Unit of Measure

(B) Dimension

N/A 0.9375 in

(B) Dimension Tolerance

N/A +0.0000/-0.0005

(D) Dimension

N/A 1- 5/8 in

(D) Dimension Tolerance

N/A +0.0000/-0.0005

(W) Dimension

N/A 1.250 in

(W1) Dimension

N/A 1.260

(H) Hole Dia.

N/A 3/32 in

(R) Max. Fillet for Shaft & Housing

N/A 0.040

Stationary Shaft Dia.

N/A 0.8746 in

Stationary Housing Bore Dia. Tolerance

N/A +0.0000/-0.0007

Rotating Shaft Dia.

N/A 0.8754 in

Rotating Shaft Dia. Tolerance

N/A +0.0000/-0.0005

Stationary Housing Bore Dia.

N/A 1.6257 in

Stationary Shaft Dia. Tolerance

N/A +0.0000/-0.0005

Rotating Housing Bore Dia.

N/A 1.6247 in

Rotating Housing Bore Dia. Tolerance

N/A +0.0000/-0.0007

Static Load Rating

N/A 12200 lb

Basic Dynamic Rating

N/A 8720 lb

Complete Assembly Item #

N/A MR-18-SS