Emerson Bearing - MR Series Heavy Duty Needle Roller Bearings without Inner Ring

Providing Market and Industry
Specific Solutions for Bearing
Needs Worldwide

PRODUCTS Ball Bearings Roller Bearings Mounted Units Oil Seals Roller Chain/ Leaf Chain Cam Followers/Yoke Rollers Rod Ends/Spherical Bushings Linear Motion Bearing Accessories Industry SolutionsNews/ArticlesVideo TutorialsEmerson Bearing Co.
View RFQ's
 Request for Quote  0 Items 
All Categories > Bearing Accessories > Adhesives, Sealants and Aerosols > Anaerobic Threadlockers > Solution 12 High Strength Green Penetrating Threadlocker > Solution 10 Medium Strength Blue Threadlocker > Solution 11 High Strength Red Threadlocker > Solution 15 Low Strength Purple Screwlocker > Solution 1000 Food Grade Antiseize > Solution 1800 General Purpose Antiseize > Solution 2600 Premium Nickel Antiseize > Solution 800 Low Friction Moly Past Lubricant > Mast Guide Ball Bearings > 51100 Series Extra Light Duty Ball Thrust Ball Bearings > HR-BC, HR-XBC Heavy Stud Crowned Hex Slot Cam Followers > CR-B, CR-XB Hex Slot Cam Followers > CR, CR-X Screwdriver Slot Cam Followers > CR-XBE Eccentric Stud Hex Slot Cam Followers > HR-B, HR-XB Heavy Stud Hex Slot Cam Followers > MCR, MCR-S, MCRV, MCRV-S Metric Cam Followers > MUTD Metric Double Row Yoke Rollers > CR-XBEC Eccentric Stud Crowned Hex Slot Cam Followers > KP Series Control Ball Bearings > KSP, KSP-A Series Control Ball Bearings > 6300 Series Deep Groove Radial Ball Bearings > Type E 2-Bolt Heavy Duty Mounted Units > Type E 4-Bolt Heavy Duty Mounted Units > Type E Piloted Flange Heavy Duty Mounted Units > MR Series Heavy Duty Needle Roller Bearings without Inner Ring > View Items 
    Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

MR Series Heavy Duty Needle Roller Bearings without Inner Ring

 
Check up to five results to perform an action.

MR series Without Ring

larger image 		Outer ring and roller assembly without separable inner ring
The outer ring and roller assemblies (MR) shown in this table are for use without inner rings on a ground shaft for which a minimum hardness of 58 Rockwell "C" scale is recommended.

Search Items


Request InformationCompare Items   Results Per Page : 
  Results 1 - 25 of 52 Unit of Measure: Imperial 1 2 3 

Complete Assembly Item #

(S) Shaft Diameter

(D) Dimension

(W) Dimension

(H) Hole Dia.

(R) Max. Fillet for Housing

MR-10-N 0.6250 in 1.1250 in 0.750 in 5/64 in 0.025 in
MR-10 0.6250 in 1.1250 in 1.000 in 5/64 in 0.025 in
MR-12-N 0.7500 in 1-1/4 in 0.750 in 5/64 in 0.040 in
MR-12 0.7500 in 1-1/4 in 1.000 in 5/64 in 0.040 in
MR-14-N 0.8750 in 1.3750 in 0.750 in 5/64 in 0.040 in
MR-14 0.8750 in 1.3750 in 1.000 in 5/64 in 0.040 in
MR-16-N 1.0000 in 1-1/2 in 1.000 in 5/64 in 0.040 in
MR-16 1.0000 in 1-1/2 in 1.250 in 5/64 in 0.040 in
MR-18-N 1.1250 in 1- 5/8 in 1.000 in 3/32 in 0.040 in
MR-18 1.1250 in 1- 5/8 in 1.250 in 3/32 in 0.040 in
MR-20-N 1.2500 in 1-3/4 in 1.000 in 3/32 in 0.040 in
MR-20 1.2500 in 1-3/4 in 1.250 in 3/32 in 0.040 in
MR-22-N 1.3750 in 1.8750 in 1.000 in 3/32 in 0.040 in
MR-22 1.3750 in 1.8750 in 1.250 in 3/32 in 0.040 in
MR-24-N 1.5000 in 2.0625 in 1.000 in 3/32 in 0.060 in
MR-24 1.5000 in 2.0625 in 1.250 in 3/32 in 0.060 in
MR-26-N 1.6250 in 2.1875 in 1.000 in 3/32 in 0.060 in
MR-26 1.6250 in 2.1875 in 1.250 in 3/32 in 0.060 in
MR-28-N 1.7500 in 2.3125 in 1.000 in 3/32 in 0.060 in
MR-28 1.7500 in 2.3125 in 1.250 in 3/32 in 0.060 in
MR-30-N 1.8750 in 2.4375 in 1.000 in 3/32 in 0.060 in
MR-30 1.8750 in 2.4375 in 1.250 in 3/32 in 0.060 in
MR-31 1.9375 in 2.5000 in 1.250 in 3/32 in 0.060 in
MR-32-N 2.0000 in 2.5625 in 1.000 in 3/32 in 0.060 in
MR-32 2.0000 in 2.5625 in 1.250 in 3/32 in 0.060 in
  Results 1 - 25 of 52 1 2 3 
New England Customer?
Click here »Visa, Mastercard, American Express and Discover Accepted
Visa, Mastercard, American
Express and Discover Accepted
Se Habla Español
Copyright - 2009 Emerson Bearing CompanySite created by ThomasNet Web Solutions and powered by Navigator Platform