Outer ring and roller assembly with separable inner ring
For a complete bearing, specify both outer and inner, as each is packed and shipped separately. Consult McGill Engineering Department for additional information on CAGEROL® bearing sizes not listed as available with seals. The suffix "SS" indicates double seals with lips turned in (illustrated at right). This construction is most common and is intended primarily for lubrication retention. For other seal combinations.
Note: Not available from stock. Consult McGill Customer Service for availability.
For a complete bearing, specify both outer and inner, as each is packed and shipped separately. Consult McGill Engineering Department for additional information on CAGEROL® bearing sizes not listed as available with seals. The suffix "SS" indicates double seals with lips turned in (illustrated at right). This construction is most common and is intended primarily for lubrication retention. For other seal combinations.
Note: Not available from stock. Consult McGill Customer Service for availability.
Unit of Measure
(B) Dimension |
N/A 3.1250 in |
(B) Dimension Tolerance |
N/A +0.0000/-0.0006 |
(D) Dimension |
N/A 4.7500 in |
(D) Dimension Tolerance |
N/A +0.0000/-0.0008 |
(W) Dimension |
N/A 2.000 in |
(W1) Dimension |
N/A 2.010 |
(H) Hole Dia. |
N/A 3/16 in |
(R) Max. Fillet for Shaft & Housing |
N/A 0.100 |
Stationary Shaft Dia. |
N/A 3.1246 in |
Stationary Housing Bore Dia. Tolerance |
N/A +0.0000/-0.0010 |
Rotating Shaft Dia. |
N/A 3.1260 in |
Rotating Shaft Dia. Tolerance |
N/A +0.0000/-0.0010 |
Stationary Housing Bore Dia. |
N/A 4.7508 in |
Stationary Shaft Dia. Tolerance |
N/A +0.0000/-0.0010 |
Rotating Housing Bore Dia. |
N/A 4.7495 in |
Rotating Housing Bore Dia. Tolerance |
N/A +0.0000/-0.0010 |
Static Load Rating |
N/A 74700 lb |
Basic Dynamic Rating |
N/A 31600 lb |
Complete Assembly Item # |
N/A MR-60-SS |
