All Categories > Linear Motion > KB Metric Type Linear Motion Bearings > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

KB Metric Type Linear Motion Bearings

 
Check up to five results to perform an action.


Our metric linear motion bearings, ideal for single-direction motion applications, are widely used in Europe. Offered in a wide variety of shaft shapes, these bearings are available in chrome or stainless steel with either a steel or resin retainer. The slide block housings are also available in several styles. These bearings contain internal seals (UU).

The KB series is available in standard, adjustable, or open style, which incorporates bottom plates and mounting screws to ensure the bushing remains in proper position.

Available Dimensions:

Shaft Diameter (dr): 8 mm to 80 mm

Outer Diameter (D): 16 mm to 120 mm

Length (L): 25 mm to 165 mm

Distance Between Retaining Rings (B): 16.5 mm to 133.7 mm

Retaining Ring Width (W): 1.1 mm to 4.15 mm

Retaining Ring Diameter (D1): 15.2 mm to 116 mm

Dynamic Load (C): 27 kgf to 750 kgf

Static Load (Co): 41 kgf to 1,630 kgf

Configuration: Open, standard and adjustable type are available.

Seal Type: Seals on both ends are available, as well as no seals.


   
  Results 1 - 25 of 56 Unit of Measure: Metric 1 2 3 

Item #

(dr) Shaft Diameter

(D) Outer Diameter

Length

Dist. Btwn Retaining Rings

(W) Retaining Ring Width

(D1) Retaining Ring Diameter

(C) Dynamic Load

(Co) Static Load

Configuration

Seal Type
KB 8 8 mm 16 mm 25 mm 16.5 mm 1.1 mm 15.2 mm 27 kgf 41 kgf Standard Type No Seals
KB 8UU 8 mm 16 mm 25 mm 16.5 mm 1.1 mm 15.2 mm 27 kgf 41 kgf Standard Type Seals on Both Ends
KB 12 12 mm 22 mm 32 mm 22.9 mm 1.3 mm 21 mm 52 kgf 79 kgf Standard Type No Seals
KB 12UU 12 mm 22 mm 32 mm 22.9 mm 1.3 mm 21 mm 52 kgf 79 kgf Standard Type Seals on Both Ends
KB 12-AJ 12 mm 22 mm 32 mm 22.9 mm 1.3 mm 21 mm 52 kgf 79 kgf Adjustable Type No Seals
KB 12UU-AJ 12 mm 22 mm 32 mm 22.9 mm 1.3 mm 21 mm 52 kgf 79 kgf Adjustable Type Seals on Both Ends
KB 12-OP 12 mm 22 mm 32 mm 22.9 mm 1.3 mm 21 mm 52 kgf 79 kgf Open Type No Seals
KB 12UU-OP 12 mm 22 mm 32 mm 22.9 mm 1.3 mm 21 mm 52 kgf 79 kgf Open Type Seals on Both Ends
KB 16 16 mm 26 mm 36 mm 24.9 mm 1.3 mm 24.9 mm 59 kgf 91 kgf Standard Type No Seals
KB 16UU 16 mm 26 mm 36 mm 24.9 mm 1.3 mm 24.9 mm 59 kgf 91 kgf Standard Type Seals on Both Ends
KB 16-AJ 16 mm 26 mm 36 mm 24.9 mm 1.3 mm 24.9 mm 59 kgf 91 kgf Adjustable Type No Seals
KB 16UU-AJ 16 mm 26 mm 36 mm 24.9 mm 1.3 mm 24.9 mm 59 kgf 91 kgf Adjustable Type Seals on Both Ends
KB 16-OP 16 mm 26 mm 36 mm 24.9 mm 1.3 mm 24.9 mm 59 kgf 91 kgf Open Type No Seals
KB 16UU-OP 16 mm 26 mm 36 mm 24.9 mm 1.3 mm 24.9 mm 59 kgf 91 kgf Open Type Seals on Both Ends
KB 20 20 mm 32 mm 45 mm 31.5 mm 1.6 mm 30.3 mm 88 kgf 140 kgf Standard Type No Seals
KB 20UU 20 mm 32 mm 45 mm 31.5 mm 1.6 mm 30.3 mm 88 kgf 140 kgf Standard Type Seals on Both Ends
KB 20-AJ 20 mm 32 mm 45 mm 31.5 mm 1.6 mm 30.3 mm 88 kgf 140 kgf Adjustable Type No Seals
KB 20UU-AJ 20 mm 32 mm 45 mm 31.5 mm 1.6 mm 30.3 mm 88 kgf 140 kgf Adjustable Type Seals on Both Ends
KB 20-OP 20 mm 32 mm 45 mm 31.5 mm 1.6 mm 30.3 mm 88 kgf 140 kgf Open Type No Seals
KB 20UU-OP 20 mm 32 mm 45 mm 31.5 mm 1.6 mm 30.3 mm 88 kgf 140 kgf Open Type Seals on Both Ends
KB 25 25 mm 40.0 mm 58 mm 44.1 mm 1.85 mm 37.5 mm 100 kgf 160 kgf Standard Type No Seals
KB 25UU 25 mm 40.0 mm 58 mm 44.1 mm 1.85 mm 37.5 mm 100 kgf 160 kgf Standard Type Seals on Both Ends
KB 25-AJ 25 mm 40.0 mm 58 mm 44.1 mm 1.85 mm 37.5 mm 100 kgf 160 kgf Adjustable Type No Seals
KB 25UU-AJ 25 mm 40.0 mm 58 mm 44.1 mm 1.85 mm 37.5 mm 100 kgf 160 kgf Adjustable Type Seals on Both Ends
KB 25-OP 25 mm 40.0 mm 58 mm 44.1 mm 1.85 mm 37.5 mm 100 kgf 160 kgf Open Type No Seals
  Results 1 - 25 of 56 1 2 3