Metric Oil Seals
Oil Seals
Available in both imperial and metric dimensions for single- and double-lip designs, oil seals are vital to the daily operation of most factories and a wide range of industrial and commercial equipment. Various lip materials are also available to best suit design challenges such as temperature and chemical resistance, while material options range from nitrile for low-temperature applications to Viton® for high-temperature and low-compression operations.
Common lip materials available for use in our metric oil seals include:
- Nitrile — A low-cost option, nitrile has superior low-temperature capability and abrasion resistance, as well as low swell in hydrocarbon fluids. It has poor heat resistance, however, and is not resistant to ozone or lubricants containing sulphur or EP additives or hydrocarbons/oxygenate blends.
- Temperature range: -40° F to 225° F / -40° C to 107° C)
- Polyacrylate — Unlike nitrile, this higher-cost material has high resistance to EP lubricants and higher heat capabilities. It also features low swell in hydrocarbon fluids. Polyacrylate has limited to low temperature capability and poor dry running capability. It’s also subject to attack in aqueous media.
-
- Temperature range: -20° F to 300° F / -29° C to 49° C)
- Silicone — Good dry-heat resistance, excellent low-temperature capability, and good ozone resistance make silicone an ideal, relatively affordable lip material for many applications. It can, however, be easily damaged during installation, and has poor resistance to some EP additives and oxidized oil. Silicone also has a high swell and poor dry running performance.
- Temperature range: -80° F to 350° F / -62° C to 176° C)
- Fluoro-elastomer — Although relatively expensive, long-lasting fluoro-elastomer has excellent high-temperature capabilities and is compatible with many types of fluids. It does have poor resistance to basic fluids, and is prone to attack by high-performance gear lubes.
- Temperature range: -30° F to 400° F / -35° C to 204° C)
Depending on your application, you may need to employ premium lip materials, such as:
- Ethylene-acrylic (Varmac®) — This intermediate-cost material has higher heat capabilities than both nitrile and polyacrylate, and also has a better low-temperature performance than polyacrylate. It has good abrasion and dry running capabilities. However, it has high swell in hydrocarbon fluids and limited capability in high-frequency applications or following eccentric shafts.
- Temperature range: -30° F to 325° F / -34° C to 163° C)Tetrafluoro-ethylene propylene (Aflas®) — More expensive than fluoro-elastomers, this material has better chemical resistance to all hydrocarbon fluids, acids, bases, and oxidizing agents. It can perform in the complete range of hydraulic fluids and has continuous heat resistance over 400° F. As for its weaknesses, tetrafluoro-ethylene propylene has poor chemical resistance to hydrocarbon-oxygenate blends and poor low-temperature capabilities.
- Temperature range: -30° F to 400° F / -34° C to 204° C)
Available Dimensions:
Shaft Diameter (d): 6 mm to 400 mm
Outer Diameter (D): 16 mm to 440 mm
Width (b): 4 mm to 95 mm
Item # |
(d) Shaft Diameter |
(D) Outer Diameter |
(b) Width |
---|---|---|---|
MS35X80X8 MS35X80X8/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 35 mm | (D) Outer Diameter N/A 80 mm | (b) Width N/A 8 mm |
MS36X52X7 MS36X52X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 36 mm | (D) Outer Diameter N/A 52 mm | (b) Width N/A 7 mm |
MS36X54X7.5 MS36X54X7.5/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 36 mm | (D) Outer Diameter N/A 54 mm | (b) Width N/A 7.5 mm |
MS36X56X10 MS36X56X10/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 36 mm | (D) Outer Diameter N/A 56 mm | (b) Width N/A 10 mm |
MS36X62X7 MS36X62X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 36 mm | (D) Outer Diameter N/A 62 mm | (b) Width N/A 7 mm |
MS36X68X10 MS36X68X10/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 36 mm | (D) Outer Diameter N/A 68 mm | (b) Width N/A 10 mm |
MS37X52X8 MS37X52X8/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 37 mm | (D) Outer Diameter N/A 52 mm | (b) Width N/A 8 mm |
MS38X50X7 MS38X50X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 38 mm | (D) Outer Diameter N/A 50 mm | (b) Width N/A 7 mm |
MS38X50X7V MS38X50X7V/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 38 mm | (D) Outer Diameter N/A 50 mm | (b) Width N/A 7V mm |
MS38X52X7 MS38X52X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 38 mm | (D) Outer Diameter N/A 52 mm | (b) Width N/A 7 mm |
MS38X52X8.5 MS38X52X8.5/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 38 mm | (D) Outer Diameter N/A 52 mm | (b) Width N/A 8.5 mm |
MS38X54X10 MS38X54X10/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 38 mm | (D) Outer Diameter N/A 54 mm | (b) Width N/A 10 mm |
MS38X60X8 MS38X60X8/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 38 mm | (D) Outer Diameter N/A 60 mm | (b) Width N/A 8 mm |
MS38X62X7 MS38X62X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 38 mm | (D) Outer Diameter N/A 62 mm | (b) Width N/A 7 mm |
MS38X72X10 MS38X72X10/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 38 mm | (D) Outer Diameter N/A 72 mm | (b) Width N/A 10 mm |
MS38X74X8 MS38X74X8/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 38 mm | (D) Outer Diameter N/A 74 mm | (b) Width N/A 8 mm |
MS38X80X8 MS38X80X8/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 38 mm | (D) Outer Diameter N/A 80 mm | (b) Width N/A 8 mm |
MS40X52X7 MS40X52X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 40 mm | (D) Outer Diameter N/A 52 mm | (b) Width N/A 7 mm |
MS40X55X6 MS40X55X6/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 40 mm | (D) Outer Diameter N/A 55 mm | (b) Width N/A 6 mm |
MS40X55X8 MS40X55X8/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 40 mm | (D) Outer Diameter N/A 55 mm | (b) Width N/A 8 mm |
MS40X56X7 MS40X56X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 40 mm | (D) Outer Diameter N/A 56 mm | (b) Width N/A 7 mm |
MS40X57X10 MS40X57X10/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 40 mm | (D) Outer Diameter N/A 57 mm | (b) Width N/A 10 mm |
MS40X60X10 MS40X60X10/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 40 mm | (D) Outer Diameter N/A 60 mm | (b) Width N/A 10 mm |
MS40X62X7 MS40X62X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 40 mm | (D) Outer Diameter N/A 62 mm | (b) Width N/A 7 mm |
MS40X62X8 MS40X62X8/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 40 mm | (D) Outer Diameter N/A 62 mm | (b) Width N/A 8 mm |