Metric Oil Seals
Oil Seals
Available in both imperial and metric dimensions for single- and double-lip designs, oil seals are vital to the daily operation of most factories and a wide range of industrial and commercial equipment. Various lip materials are also available to best suit design challenges such as temperature and chemical resistance, while material options range from nitrile for low-temperature applications to Viton® for high-temperature and low-compression operations.
Common lip materials available for use in our metric oil seals include:
- Nitrile — A low-cost option, nitrile has superior low-temperature capability and abrasion resistance, as well as low swell in hydrocarbon fluids. It has poor heat resistance, however, and is not resistant to ozone or lubricants containing sulphur or EP additives or hydrocarbons/oxygenate blends.
- Temperature range: -40° F to 225° F / -40° C to 107° C)
- Polyacrylate — Unlike nitrile, this higher-cost material has high resistance to EP lubricants and higher heat capabilities. It also features low swell in hydrocarbon fluids. Polyacrylate has limited to low temperature capability and poor dry running capability. It’s also subject to attack in aqueous media.
-
- Temperature range: -20° F to 300° F / -29° C to 49° C)
- Silicone — Good dry-heat resistance, excellent low-temperature capability, and good ozone resistance make silicone an ideal, relatively affordable lip material for many applications. It can, however, be easily damaged during installation, and has poor resistance to some EP additives and oxidized oil. Silicone also has a high swell and poor dry running performance.
- Temperature range: -80° F to 350° F / -62° C to 176° C)
- Fluoro-elastomer — Although relatively expensive, long-lasting fluoro-elastomer has excellent high-temperature capabilities and is compatible with many types of fluids. It does have poor resistance to basic fluids, and is prone to attack by high-performance gear lubes.
- Temperature range: -30° F to 400° F / -35° C to 204° C)
Depending on your application, you may need to employ premium lip materials, such as:
- Ethylene-acrylic (Varmac®) — This intermediate-cost material has higher heat capabilities than both nitrile and polyacrylate, and also has a better low-temperature performance than polyacrylate. It has good abrasion and dry running capabilities. However, it has high swell in hydrocarbon fluids and limited capability in high-frequency applications or following eccentric shafts.
- Temperature range: -30° F to 325° F / -34° C to 163° C)Tetrafluoro-ethylene propylene (Aflas®) — More expensive than fluoro-elastomers, this material has better chemical resistance to all hydrocarbon fluids, acids, bases, and oxidizing agents. It can perform in the complete range of hydraulic fluids and has continuous heat resistance over 400° F. As for its weaknesses, tetrafluoro-ethylene propylene has poor chemical resistance to hydrocarbon-oxygenate blends and poor low-temperature capabilities.
- Temperature range: -30° F to 400° F / -34° C to 204° C)
Available Dimensions:
Shaft Diameter (d): 6 mm to 400 mm
Outer Diameter (D): 16 mm to 440 mm
Width (b): 4 mm to 95 mm
Item # |
(d) Shaft Diameter |
(D) Outer Diameter |
(b) Width |
---|---|---|---|
MS20X48X7 MS20X48X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 20 mm | (D) Outer Diameter N/A 48 mm | (b) Width N/A 7 mm |
MS20X50X7 MS20X50X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 20 mm | (D) Outer Diameter N/A 50 mm | (b) Width N/A 7 mm |
MS20X52X7 MS20X52X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 20 mm | (D) Outer Diameter N/A 52 mm | (b) Width N/A 7 mm |
MS21X35X7 MS21X35X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 21 mm | (D) Outer Diameter N/A 35 mm | (b) Width N/A 7 mm |
MS22X32X7 MS22X32X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 22 mm | (D) Outer Diameter N/A 32 mm | (b) Width N/A 7 mm |
MS22X35X7 MS22X35X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 22 mm | (D) Outer Diameter N/A 35 mm | (b) Width N/A 7 mm |
MS22X36X7 MS22X36X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 22 mm | (D) Outer Diameter N/A 36 mm | (b) Width N/A 7 mm |
MS22X40X8 MS22X40X8/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 22 mm | (D) Outer Diameter N/A 40 mm | (b) Width N/A 8 mm |
MS22X40X7V MS22X40X7V/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 22 mm | (D) Outer Diameter N/A 40 mm | (b) Width N/A 7V mm |
MS22X42X7 MS22X42X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 22 mm | (D) Outer Diameter N/A 42 mm | (b) Width N/A 7 mm |
MS22X45X7 MS22X45X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 22 mm | (D) Outer Diameter N/A 45 mm | (b) Width N/A 7 mm |
MS22X47X7 MS22X47X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 22 mm | (D) Outer Diameter N/A 47 mm | (b) Width N/A 7 mm |
MS24X35X7 MS24X35X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 24 mm | (D) Outer Diameter N/A 35 mm | (b) Width N/A 7 mm |
MS24X38X7 MS24X38X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 24 mm | (D) Outer Diameter N/A 38 mm | (b) Width N/A 7 mm |
MS24X40X7 MS24X40X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 24 mm | (D) Outer Diameter N/A 40 mm | (b) Width N/A 7 mm |
MS24X42X7 MS24X42X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 24 mm | (D) Outer Diameter N/A 42 mm | (b) Width N/A 7 mm |
MS24X42X8 MS24X42X8/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 24 mm | (D) Outer Diameter N/A 42 mm | (b) Width N/A 8 mm |
MS24X52X7 MS24X52X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 24 mm | (D) Outer Diameter N/A 52 mm | (b) Width N/A 7 mm |
MS25X35X6 MS25X35X6/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 25 mm | (D) Outer Diameter N/A 35 mm | (b) Width N/A 6 mm |
MS25X35X7 MS25X35X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 25 mm | (D) Outer Diameter N/A 35 mm | (b) Width N/A 7 mm |
MS25X36X7 MS25X36X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 25 mm | (D) Outer Diameter N/A 36 mm | (b) Width N/A 7 mm |
MS25X37X7 MS25X37X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 25 mm | (D) Outer Diameter N/A 37 mm | (b) Width N/A 7 mm |
MS25X38X7 MS25X38X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 25 mm | (D) Outer Diameter N/A 38 mm | (b) Width N/A 7 mm |
MS25X40X7 MS25X40X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 25 mm | (D) Outer Diameter N/A 40 mm | (b) Width N/A 7 mm |
MS25X40X7V MS25X40X7V/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 25 mm | (D) Outer Diameter N/A 40 mm | (b) Width N/A 7V mm |