Metric Oil Seals
Oil Seals
Available in both imperial and metric dimensions for single- and double-lip designs, oil seals are vital to the daily operation of most factories and a wide range of industrial and commercial equipment. Various lip materials are also available to best suit design challenges such as temperature and chemical resistance, while material options range from nitrile for low-temperature applications to Viton® for high-temperature and low-compression operations.
Common lip materials available for use in our metric oil seals include:
- Nitrile — A low-cost option, nitrile has superior low-temperature capability and abrasion resistance, as well as low swell in hydrocarbon fluids. It has poor heat resistance, however, and is not resistant to ozone or lubricants containing sulphur or EP additives or hydrocarbons/oxygenate blends.
- Temperature range: -40° F to 225° F / -40° C to 107° C)
- Polyacrylate — Unlike nitrile, this higher-cost material has high resistance to EP lubricants and higher heat capabilities. It also features low swell in hydrocarbon fluids. Polyacrylate has limited to low temperature capability and poor dry running capability. It’s also subject to attack in aqueous media.
-
- Temperature range: -20° F to 300° F / -29° C to 49° C)
- Silicone — Good dry-heat resistance, excellent low-temperature capability, and good ozone resistance make silicone an ideal, relatively affordable lip material for many applications. It can, however, be easily damaged during installation, and has poor resistance to some EP additives and oxidized oil. Silicone also has a high swell and poor dry running performance.
- Temperature range: -80° F to 350° F / -62° C to 176° C)
- Fluoro-elastomer — Although relatively expensive, long-lasting fluoro-elastomer has excellent high-temperature capabilities and is compatible with many types of fluids. It does have poor resistance to basic fluids, and is prone to attack by high-performance gear lubes.
- Temperature range: -30° F to 400° F / -35° C to 204° C)
Depending on your application, you may need to employ premium lip materials, such as:
- Ethylene-acrylic (Varmac®) — This intermediate-cost material has higher heat capabilities than both nitrile and polyacrylate, and also has a better low-temperature performance than polyacrylate. It has good abrasion and dry running capabilities. However, it has high swell in hydrocarbon fluids and limited capability in high-frequency applications or following eccentric shafts.
- Temperature range: -30° F to 325° F / -34° C to 163° C)Tetrafluoro-ethylene propylene (Aflas®) — More expensive than fluoro-elastomers, this material has better chemical resistance to all hydrocarbon fluids, acids, bases, and oxidizing agents. It can perform in the complete range of hydraulic fluids and has continuous heat resistance over 400° F. As for its weaknesses, tetrafluoro-ethylene propylene has poor chemical resistance to hydrocarbon-oxygenate blends and poor low-temperature capabilities.
- Temperature range: -30° F to 400° F / -34° C to 204° C)
Available Dimensions:
Shaft Diameter (d): 6 mm to 400 mm
Outer Diameter (D): 16 mm to 440 mm
Width (b): 4 mm to 95 mm
Item # |
(d) Shaft Diameter |
(D) Outer Diameter |
(b) Width |
---|---|---|---|
MS115X145X13 MS115X145X13/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 115 mm | (D) Outer Diameter N/A 145 mm | (b) Width N/A 13 mm |
MS115X145X14 MS115X145X14/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 115 mm | (D) Outer Diameter N/A 145 mm | (b) Width N/A 14 mm |
MS115X160X15 MS115X160X15/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 115 mm | (D) Outer Diameter N/A 160 mm | (b) Width N/A 15 mm |
MS120X150X12 MS120X150X12/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 120 mm | (D) Outer Diameter N/A 150 mm | (b) Width N/A 12 mm |
MS120X155X15 MS120X155X15/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 120 mm | (D) Outer Diameter N/A 155 mm | (b) Width N/A 15 mm |
MS120X160X12 MS120X160X12/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 120 mm | (D) Outer Diameter N/A 160 mm | (b) Width N/A 12 mm |
MS125X150X12 MS125X150X12/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 125 mm | (D) Outer Diameter N/A 150 mm | (b) Width N/A 12 mm |
MS125X155X12 MS125X155X12/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 125 mm | (D) Outer Diameter N/A 155 mm | (b) Width N/A 12 mm |
MS130X160X12 MS130X160X12/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 130 mm | (D) Outer Diameter N/A 160 mm | (b) Width N/A 12 mm |
MS130X160X15 MS130X160X15/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 130 mm | (D) Outer Diameter N/A 160 mm | (b) Width N/A 15 mm |
MS135X170X12 MS135X170X12/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 135 mm | (D) Outer Diameter N/A 170 mm | (b) Width N/A 12 mm |
MS140X160X12 MS140X160X12/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 140 mm | (D) Outer Diameter N/A 160 mm | (b) Width N/A 12 mm |
MS140X170X12 MS140X170X12/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 140 mm | (D) Outer Diameter N/A 170 mm | (b) Width N/A 12 mm |
MS140X170X12V MS140X170X12V/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 140 mm | (D) Outer Diameter N/A 170 mm | (b) Width N/A 12V mm |
MS160X185X10 MS160X185X10/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 160 mm | (D) Outer Diameter N/A 185 mm | (b) Width N/A 10 mm |
MS160X200X12 MS160X200X12/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 160 mm | (D) Outer Diameter N/A 200 mm | (b) Width N/A 12 mm |
MS170X210X15 MS170X210X15/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 170 mm | (D) Outer Diameter N/A 210 mm | (b) Width N/A 15 mm |
MS175X200X15 MS175X200X15/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 175 mm | (D) Outer Diameter N/A 200 mm | (b) Width N/A 15 mm |
MS185X215X16 MS185X215X16/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 185 mm | (D) Outer Diameter N/A 215 mm | (b) Width N/A 16 mm |
MS190X220X15 MS190X220X15/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 190 mm | (D) Outer Diameter N/A 220 mm | (b) Width N/A 15 mm |
MS190X225X16V MS190X225X16V/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 190 mm | (D) Outer Diameter N/A 225 mm | (b) Width N/A 16V mm |
MS190X230X16 MS190X230X16/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 190 mm | (D) Outer Diameter N/A 230 mm | (b) Width N/A 16 mm |
MS200X230X15V MS200X230X15V/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 200 mm | (D) Outer Diameter N/A 230 mm | (b) Width N/A 15V mm |
MS210X240X15 MS210X240X15/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 210 mm | (D) Outer Diameter N/A 240 mm | (b) Width N/A 15 mm |
MS210X250X15 MS210X250X15/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 210 mm | (D) Outer Diameter N/A 250 mm | (b) Width N/A 15 mm |