Metric Oil Seals
Oil Seals
Available in both imperial and metric dimensions for single- and double-lip designs, oil seals are vital to the daily operation of most factories and a wide range of industrial and commercial equipment. Various lip materials are also available to best suit design challenges such as temperature and chemical resistance, while material options range from nitrile for low-temperature applications to Viton® for high-temperature and low-compression operations.
Common lip materials available for use in our metric oil seals include:
- Nitrile — A low-cost option, nitrile has superior low-temperature capability and abrasion resistance, as well as low swell in hydrocarbon fluids. It has poor heat resistance, however, and is not resistant to ozone or lubricants containing sulphur or EP additives or hydrocarbons/oxygenate blends.
- Temperature range: -40° F to 225° F / -40° C to 107° C)
- Polyacrylate — Unlike nitrile, this higher-cost material has high resistance to EP lubricants and higher heat capabilities. It also features low swell in hydrocarbon fluids. Polyacrylate has limited to low temperature capability and poor dry running capability. It’s also subject to attack in aqueous media.
-
- Temperature range: -20° F to 300° F / -29° C to 49° C)
- Silicone — Good dry-heat resistance, excellent low-temperature capability, and good ozone resistance make silicone an ideal, relatively affordable lip material for many applications. It can, however, be easily damaged during installation, and has poor resistance to some EP additives and oxidized oil. Silicone also has a high swell and poor dry running performance.
- Temperature range: -80° F to 350° F / -62° C to 176° C)
- Fluoro-elastomer — Although relatively expensive, long-lasting fluoro-elastomer has excellent high-temperature capabilities and is compatible with many types of fluids. It does have poor resistance to basic fluids, and is prone to attack by high-performance gear lubes.
- Temperature range: -30° F to 400° F / -35° C to 204° C)
Depending on your application, you may need to employ premium lip materials, such as:
- Ethylene-acrylic (Varmac®) — This intermediate-cost material has higher heat capabilities than both nitrile and polyacrylate, and also has a better low-temperature performance than polyacrylate. It has good abrasion and dry running capabilities. However, it has high swell in hydrocarbon fluids and limited capability in high-frequency applications or following eccentric shafts.
- Temperature range: -30° F to 325° F / -34° C to 163° C)Tetrafluoro-ethylene propylene (Aflas®) — More expensive than fluoro-elastomers, this material has better chemical resistance to all hydrocarbon fluids, acids, bases, and oxidizing agents. It can perform in the complete range of hydraulic fluids and has continuous heat resistance over 400° F. As for its weaknesses, tetrafluoro-ethylene propylene has poor chemical resistance to hydrocarbon-oxygenate blends and poor low-temperature capabilities.
- Temperature range: -30° F to 400° F / -34° C to 204° C)
Available Dimensions:
Shaft Diameter (d): 6 mm to 400 mm
Outer Diameter (D): 16 mm to 440 mm
Width (b): 4 mm to 95 mm
Item # |
(d) Shaft Diameter |
(D) Outer Diameter |
(b) Width |
---|---|---|---|
MS6X16X5 MS6X16X5/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 6 mm | (D) Outer Diameter N/A 16 mm | (b) Width N/A 5 mm |
MS6X16X7 MS6X16X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 6 mm | (D) Outer Diameter N/A 16 mm | (b) Width N/A 7 mm |
MS6X22X7 MS6X22X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 6 mm | (D) Outer Diameter N/A 22 mm | (b) Width N/A 7 mm |
MS7X16X7 MS7X16X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 7 mm | (D) Outer Diameter N/A 16 mm | (b) Width N/A 7 mm |
MS7X22X7 MS7X22X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 7 mm | (D) Outer Diameter N/A 22 mm | (b) Width N/A 7 mm |
MS8X16X7 MS8X16X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 8 mm | (D) Outer Diameter N/A 16 mm | (b) Width N/A 7 mm |
MS8X18X5 MS8X18X5/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 8 mm | (D) Outer Diameter N/A 18 mm | (b) Width N/A 5 mm |
MS8X18X7 MS8X18X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 8 mm | (D) Outer Diameter N/A 18 mm | (b) Width N/A 7 mm |
MS8X22X7 MS8X22X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 8 mm | (D) Outer Diameter N/A 22 mm | (b) Width N/A 7 mm |
MS8X22X7V MS8X22X7V/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 8 mm | (D) Outer Diameter N/A 22 mm | (b) Width N/A 7V mm |
MS8X24X7 MS8X24X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 8 mm | (D) Outer Diameter N/A 24 mm | (b) Width N/A 7 mm |
MS9X18X7 MS9X18X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 9 mm | (D) Outer Diameter N/A 18 mm | (b) Width N/A 7 mm |
MS9X22X7 MS9X22X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 9 mm | (D) Outer Diameter N/A 22 mm | (b) Width N/A 7 mm |
MS9X26X7 MS9X26X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 9 mm | (D) Outer Diameter N/A 26 mm | (b) Width N/A 7 mm |
MS10X19X7 MS10X19X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 10 mm | (D) Outer Diameter N/A 19 mm | (b) Width N/A 7 mm |
MS10X22X7 MS10X22X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 10 mm | (D) Outer Diameter N/A 22 mm | (b) Width N/A 7 mm |
MS10X24X7 MS10X24X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 10 mm | (D) Outer Diameter N/A 24 mm | (b) Width N/A 7 mm |
MS10X25X7 MS10X25X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 10 mm | (D) Outer Diameter N/A 25 mm | (b) Width N/A 7 mm |
MS10X26X7 MS10X26X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 10 mm | (D) Outer Diameter N/A 26 mm | (b) Width N/A 7 mm |
MS11X22X7 MS11X22X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 11 mm | (D) Outer Diameter N/A 22 mm | (b) Width N/A 7 mm |
MS11X26X7 MS11X26X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 11 mm | (D) Outer Diameter N/A 26 mm | (b) Width N/A 7 mm |
MS11X30X7 MS11X30X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 11 mm | (D) Outer Diameter N/A 30 mm | (b) Width N/A 7 mm |
MS12X19X5 MS12X19X5/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 12 mm | (D) Outer Diameter N/A 19 mm | (b) Width N/A 5 mm |
MS12X20X5 MS12X20X5/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 12 mm | (D) Outer Diameter N/A 20.0 mm | (b) Width N/A 5 mm |
MS12X22X7 MS12X22X7/Asset/Oil-Seal-Metric-dwg.jpg | (d) Shaft Diameter N/A 12 mm | (D) Outer Diameter N/A 22 mm | (b) Width N/A 7 mm |