Outer ring and roller assembly with separable inner ring
For a complete bearing, specify both outer and inner, as each is packed and shipped separately. Consult McGill Engineering Department for additional information on CAGEROL® bearing sizes not listed as available with seals. The suffix "SS" indicates double seals with lips turned in (illustrated at right). This construction is most common and is intended primarily for lubrication retention. For other seal combinations.
For a complete bearing, specify both outer and inner, as each is packed and shipped separately. Consult McGill Engineering Department for additional information on CAGEROL® bearing sizes not listed as available with seals. The suffix "SS" indicates double seals with lips turned in (illustrated at right). This construction is most common and is intended primarily for lubrication retention. For other seal combinations.
Unit of Measure
(B) Dimension |
N/A 3.0000 in |
(B) Dimension Tolerance |
N/A +0.0000/-0.0006 |
(D) Dimension |
N/A 4.5000 in |
(D) Dimension Tolerance |
N/A +0.0000/-0.0008 |
(W) Dimension |
N/A 2.000 in |
(W1) Dimension |
N/A 2.010 |
(H) Hole Dia. |
N/A 3/16 in |
(R) Max. Fillet for Shaft & Housing |
N/A 0.080 |
Stationary Shaft Dia. |
N/A 2.9997 in |
Stationary Housing Bore Dia. Tolerance |
N/A +0.0000/-0.0010 |
Rotating Shaft Dia. |
N/A 3.0008 in |
Rotating Shaft Dia. Tolerance |
N/A +0.0000/-0.0008 |
Stationary Housing Bore Dia. |
N/A 4.5008 in |
Stationary Shaft Dia. Tolerance |
N/A +0.0000/-0.0008 |
Rotating Housing Bore Dia. |
N/A 4.4995 in |
Rotating Housing Bore Dia. Tolerance |
N/A +0.0000/-0.0010 |
Static Load Rating |
N/A 71600 lb |
Basic Dynamic Rating |
N/A 31300 lb |
Complete Assembly Item # |
N/A MR-56-SS |