Outer ring and roller assembly with separable inner ring
For a complete bearing, specify both outer and inner, as each is packed and shipped separately. Consult McGill Engineering Department for additional information on CAGEROL® bearing sizes not listed as available with seals. The suffix "SS" indicates double seals with lips turned in (illustrated at right). This construction is most common and is intended primarily for lubrication retention. For other seal combinations.
For a complete bearing, specify both outer and inner, as each is packed and shipped separately. Consult McGill Engineering Department for additional information on CAGEROL® bearing sizes not listed as available with seals. The suffix "SS" indicates double seals with lips turned in (illustrated at right). This construction is most common and is intended primarily for lubrication retention. For other seal combinations.
Unit of Measure
(B) Dimension |
N/A 1.3750 in |
(B) Dimension Tolerance |
N/A +0.0000/-0.0005 |
(D) Dimension |
N/A 2.3125 in |
(D) Dimension Tolerance |
N/A +0.0000/-0.0006 |
(W) Dimension |
N/A 1.250 in |
(W1) Dimension |
N/A 1.260 |
(H) Hole Dia. |
N/A 3/32 in |
(R) Max. Fillet for Shaft & Housing |
N/A 0.060 |
Stationary Shaft Dia. |
N/A 1.3746 in |
Stationary Housing Bore Dia. Tolerance |
N/A +0.0000/-0.0007 |
Rotating Shaft Dia. |
N/A 1.3755 in |
Rotating Shaft Dia. Tolerance |
N/A +0.0000/-0.0005 |
Stationary Housing Bore Dia. |
N/A 2.3132 in |
Stationary Shaft Dia. Tolerance |
N/A +0.0000/-0.0005 |
Rotating Housing Bore Dia. |
N/A 2.3121 in |
Rotating Housing Bore Dia. Tolerance |
N/A +0.0000/-0.0007 |
Static Load Rating |
N/A 18100 lb |
Basic Dynamic Rating |
N/A 11200 lb |
Complete Assembly Item # |
N/A MR-28-SS |