Outer ring and roller assembly with separable inner ring
For a complete bearing, specify both outer and inner, as each is packed and shipped separately. Consult McGill Engineering Department for additional information on CAGEROL® bearing sizes not listed as available with seals. The suffix "SS" indicates double seals with lips turned in (illustrated at right). This construction is most common and is intended primarily for lubrication retention. For other seal combinations.
For a complete bearing, specify both outer and inner, as each is packed and shipped separately. Consult McGill Engineering Department for additional information on CAGEROL® bearing sizes not listed as available with seals. The suffix "SS" indicates double seals with lips turned in (illustrated at right). This construction is most common and is intended primarily for lubrication retention. For other seal combinations.
Unit of Measure
(B) Dimension |
N/A 0.8125 in |
(B) Dimension Tolerance |
N/A +0.0000/-0.0005 |
(D) Dimension |
N/A 1-1/2 in |
(D) Dimension Tolerance |
N/A +0.0000/-0.0005 |
(W) Dimension |
N/A 1.000 in |
(W1) Dimension |
N/A 1.010 |
(H) Hole Dia. |
N/A 5/64 in |
(R) Max. Fillet for Shaft & Housing |
N/A 0.040 |
Stationary Shaft Dia. |
N/A 0.8121 in |
Stationary Housing Bore Dia. Tolerance |
N/A +0.0000/-0.0007 |
Rotating Shaft Dia. |
N/A 0.8129 in |
Rotating Shaft Dia. Tolerance |
N/A +0.0000/-0.0005 |
Stationary Housing Bore Dia. |
N/A 1.5007 in |
Stationary Shaft Dia. Tolerance |
N/A +0.0000/-0.0005 |
Rotating Housing Bore Dia. |
N/A 1.4997 in |
Rotating Housing Bore Dia. Tolerance |
N/A +0.0000/-0.0007 |
Static Load Rating |
N/A 7100 lb |
Basic Dynamic Rating |
N/A 5840 lb |
Complete Assembly Item # |
N/A MR-16-SS |