Pillow Block Split Roller Style Bearing

Craft split bearings offer the benefits of conventional bearings with the added feature of easy assembly around a shaft. The complete assembly comes in halves to ease the installation, inspection, and replacement of pillow block bearings, which can be done without removing or disrupting other elements of the system.

The external self-aligning cartridges and housings are machined from ductile iron for greater tensile and yield strength, and the coating is baked on instead of painted for greater resistance against elements and chemicals. In addition, all materials meet or exceed the standards set by the American Bearing Manufacturers Association (ABMA).

Same-day shipping is available for bore sizes 1.4375 in. through 12 in. Float (FL) bearings and held (HD) bearing types are available.

Available Dimensions:

Shaft Diameter (d): 1.4375 in. to 6 in.

Pedestal Housing: PH 1 to PH 10

Center Height (A): 2.375 in. to 7.125 in.

Overall Length (B): 9 in. to 22 in.

Width (C): 2.375 in. to 7 in.

Minimum Bolt Dist. (E): 6.75 in. to 19 in.

Maximum Bolt Dist. (F): 7.5 in. to 20 in.

Height (H): 5.5 in. to 16.25 in.