All Categories > Oil Seals > Metric Oil Seals > View Items Download PDF Download PDF Printable Page Email This Page Save To Favorites Please wait… Metric Oil Seals Check up to five results to perform an action. larger image Available in both imperial and metric dimensions for single- and double-lip designs, oil seals are vital to the daily operation of most factories and a wide range of industrial and commercial equipment. Various lip materials are also available to best suit design challenges such as temperature and chemical resistance, while material options range from nitrile for low-temperature applications to Viton® for high-temperature and low-compression operations. Common lip materials available for use in our metric oil seals include: Nitrile — A low-cost option, nitrile has superior low-temperature capability and abrasion resistance, as well as low swell in hydrocarbon fluids. It has poor heat resistance, however, and is not resistant to ozone or lubricants containing sulphur or EP additives or hydrocarbons/oxygenate blends. Temperature range: -40° F to 225° F / -40° C to 107° C) Polyacrylate — Unlike nitrile, this higher-cost material has high resistance to EP lubricants and higher heat capabilities. It also features low swell in hydrocarbon fluids. Polyacrylate has limited to low temperature capability and poor dry running capability. It’s also subject to attack in aqueous media. Temperature range: -20° F to 300° F / -29° C to 49° C) Silicone — Good dry-heat resistance, excellent low-temperature capability, and good ozone resistance make silicone an ideal, relatively affordable lip material for many applications. It can, however, be easily damaged during installation, and has poor resistance to some EP additives and oxidized oil. Silicone also has a high swell and poor dry running performance. Temperature range: -80° F to 350° F / -62° C to 176° C) Fluoro-elastomer — Although relatively expensive, long-lasting fluoro-elastomer has excellent high-temperature capabilities and is compatible with many types of fluids. It does have poor resistance to basic fluids, and is prone to attack by high-performance gear lubes. Temperature range: -30° F to 400° F / -35° C to 204° C) Depending on your application, you may need to employ premium lip materials, such as: Ethylene-acrylic (Varmac®) — This intermediate-cost material has higher heat capabilities than both nitrile and polyacrylate, and also has a better low-temperature performance than polyacrylate. It has good abrasion and dry running capabilities. However, it has high swell in hydrocarbon fluids and limited capability in high-frequency applications or following eccentric shafts. Temperature range: -30° F to 325° F / -34° C to 163° C)Tetrafluoro-ethylene propylene (Aflas®) — More expensive than fluoro-elastomers, this material has better chemical resistance to all hydrocarbon fluids, acids, bases, and oxidizing agents. It can perform in the complete range of hydraulic fluids and has continuous heat resistance over 400° F. As for its weaknesses, tetrafluoro-ethylene propylene has poor chemical resistance to hydrocarbon-oxygenate blends and poor low-temperature capabilities. Temperature range: -30° F to 400° F / -34° C to 204° C) Available Dimensions: Shaft Diameter (d): 6 mm to 400 mm Outer Diameter (D): 16 mm to 440 mm Width (b): 4 mm to 95 mm Results Per Page : 25 50 100 200 Results 351 - 375 of 408 Unit of Measure: Metric « 11 12 13 14 15 » Item # (d) Shaft Diameter (D) Outer Diameter (b) Width MS85X110X10 85 mm 110 mm 10 mm MS85X110X12 85 mm 110 mm 12 mm MS85X110X12V 85 mm 110 mm 12V mm MS85X115X13 85 mm 115 mm 13 mm MS85X120X12 85 mm 120 mm 12 mm MS85X125X12 85 mm 125 mm 12 mm MS88X110X12 88 mm 110 mm 12 mm MS90X110X13 90 mm 110 mm 13 mm MS90X125X12 90 mm 125 mm 12 mm MS92X120X13 92 mm 120 mm 13 mm MS95X130X12 95 mm 130 mm 12 mm MS98X120X13 98 mm 120 mm 13 mm MS100X120X10 100 mm 120 mm 10 mm MS100X120X12 100 mm 120 mm 12 mm MS100X125X12 100 mm 125 mm 12 mm MS100X130X12 100 mm 130 mm 12 mm MS105X125X13 105 mm 125 mm 13 mm MS105X130X12 105 mm 130 mm 12 mm MS110X130X12 110 mm 130 mm 12 mm MS110X135X12 110 mm 135 mm 12 mm MS110X135X13 110 mm 135 mm 13 mm MS110X140X12 110 mm 140 mm 12 mm MS110X145X12 110 mm 145 mm 12 mm MS110X145X13 110 mm 145 mm 13 mm MS114X140X13 114 mm 140 mm 13 mm Results 351 - 375 of 408 « 11 12 13 14 15 »
