Item # CM7Y, CM-Y (Male) 2 Piece, Metal to Metal Rod Ends with Studs On Emerson Bearing

Rod ends and spherical bushings are used for linkage applications where a bearing has to accommodate severe misalignment. They are available with self lubricating or metal to metal inserts. Inch and metric. Standard rod ends have right hand threads although left hand threads are available as an option. Grease fittings available. Male Rod End load ratings based on no lubricating fitting. For load ratings with lubricator, please contact Emerson Bearing.

Unit of Measure

Specifications

(D) Diameter	N/A 1.1250 in
(D) Tolerance	N/A -.010 in+.010 in
(L) Length	N/A 1.750 in
(L) Tolerance	N/A -.015 in+.015 in
(S) Length	N/A .937 in
(P) Length	N/A 1.062 in
(T) Width	N/A 0.406 in
(A) Length	N/A 2.125 in
(A) Tolerance	N/A -.015 in+.015 in
(N) Thread	N/A 7/16-20
Thread Type	N/A 3A UNF
(C) Thread Length	N/A 1.375 in
(C) Tolerance	N/A -.031 in+.062 in
a° Mis. Angle	N/A 44
Approx. Weight	N/A .24 lb
Configuration	N/A Right Hand Thread
Ball Material	N/A 52100 Steel, Rc 56 Min., Hard Chrome Plated
Body Material	N/A Low Carbon Steel, Zinc Plated, Chromate Treated
Stud Material	N/A Low Carbon Steel, Zinc Plated
Common Options	N/A Y-- Right Hand Stud YL-- Left Hand Stud YX-- Heat Treated Right Stud YXL-- Heat Treated Left Stud Z-- Grease Fittings
Alinabal P/N	N/A AM-S-GP7
Aurora P/N	N/A CM-S7
Heim/Boston P/N	N/A M-CRY7
Morse/Spherco P/N	N/A CFM7Y
Tuthill P/N	N/A MSM-S7

Specifications

(D) Diameter

(D) Tolerance

(L) Length

(L) Tolerance

(S) Length

(P) Length

(T) Width

(A) Length

(A) Tolerance

(N) Thread

Thread Type

(C) Thread Length

(C) Tolerance

a° Mis. Angle

Approx. Weight

Configuration

Ball Material

Body Material

Stud Material

Common Options

Alinabal P/N

Aurora P/N

Heim/Boston P/N

Morse/Spherco P/N

Tuthill P/N