Action Bearing Logo
Action Bearing Company
201 Brighton Avenue
Boston, MA 02134
Phone: (800) 225-4587 • Fax: (800) 252-1996
Email: info@actionbearing.com
Print Back

Ideal for single-direction motion applications, these standard linear bushings are available in wide variety of shaft shapes and materials — chrome or stainless steel with either a steel or resin retainer. These bearings contain internal seals (UU), and the slide block housings are available in several styles.

The SW series is available in standard, adjustable, or open style; open style incorporates bottom plates and mounting screws to ensure bushings remain in the proper position.

Available Dimensions:

Shaft Diameter (dr): 0.25 in. to 4 in.

Outer Diameter (D): 0.5 in. to 6 in.

Length (L): 0.75 in. to 8 in.

Distance Between Retaining Rings (B): 0.511 in. to 6.258 in.

Retaining Ring Width (W): 0.039 in. to 0.1389 in.

Retaining Ring Diameter (D1): 0.4687 in. to 5.745 in.

Dynamic Load (C): 206 to 14,100 CN

Static Load (Co): 265 to 34,800 CoN

Configuration: Open, standard, and adjustable types are available.

Seal Type: Seals on both ends are available, as well as no seals.

SW Type Linear Motion Bearing Dimension Diagram
SW--SM--KB-Linear-Motion
Unit of Measure
Items SW Type Linear Motion Bearing Dimension Diagram
SW 4
SW Type Linear Motion Bearings 		SW Type Linear Motion Bearing Dimension Diagram
SW 4UU
SW Type Linear Motion Bearings 		SW Type Linear Motion Bearing Dimension Diagram
SW 6
SW Type Linear Motion Bearings 		SW Type Linear Motion Bearing Dimension Diagram
SW 6UU
SW Type Linear Motion Bearings 		SW Type Linear Motion Bearing Dimension Diagram
SW 8
SW Type Linear Motion Bearings
(dr) Shaft Diameter N/A 0.25 in N/A 0.25 in N/A 0.375 in N/A 0.375 in N/A 0.5000 in
(dr) Precision Tolerance N/A 0/-0.00025 in
(dr) High Tolerance N/A 0/-0.00040 in
(D) Outer Diameter N/A 0.5 in N/A 0.5 in N/A 0.625 in N/A 0.625 in N/A 7/8 in
(D) Tolerance N/A 0/-0.00045 in N/A 0/-0.00045 in N/A 0/-0.00050 in N/A 0/-0.00050 in N/A 0/-0.00050 in
Length N/A 0.75 in N/A 0.75 in N/A 0.875 in N/A 0.875 in N/A 1.25 in
(L) Tolerance N/A 0/-0.008 in
Dist. Btwn Retaining Rings N/A 0.511 in N/A 0.511 in N/A 0.6358 in N/A 0.6358 in N/A 0.9625 in
(B) Tolerance N/A 0/-0.008 in
(W) Retaining Ring Width N/A 0.039 in N/A 0.039 in N/A 0.039 in N/A 0.039 in N/A 0.0459 in
(D1) Retaining Ring Diameter N/A 0.4687 in N/A 0.4687 in N/A 0.588 in N/A 0.588 in N/A 0.8209 in
(h) Dimension N/A N/A N/A N/A N/A 0.06 in
(h1) Dimension N/A N/A N/A N/A N/A 0.34 in
(C) Dynamic Load N/A
(Co) Static Load N/A
Ball Circuit N/A 3 N/A 3 N/A 4 N/A 4 N/A 4
Configuration N/A Standard Type
Seal Type N/A No Seals N/A Seals on Both Ends N/A No Seals N/A Seals on Both Ends N/A No Seals
(θ) Dimension N/A N/A N/A N/A N/A 80 ยบ
Precision Eccentricity N/A 0.0003 in
High Eccentricity N/A 0.0005 in
Maximum Radial Clearance N/A -0.0001 in
Available Housing Types N/A
NB TOPBALL Slide Units include a clear anodized corrosion resistant aluminum block and either one or two TOPBALL self-aligning slide bushings Closed and adjustable clearance styles incorporate machined snap ring grooves in combination with standard retaining rings for slide bush retention. The open style incorporates bottom plates and mounting screws to retain bushing in proper position. All styles are provided with standard machined reference edges for proper alignment and installation.
Different Housing Types N/A a1375.jpg