Our TW type linear motion bearings, often referred to as the ‘Super Series,” are used for applications that require single-direction motion, and are available in a wide variety of shaft shapes and materials. These lightweight, low-noise bearings feature a higher load capacity and travel life than the SW series, while the floating integral wiper seals allow for easy self-alignment. All bearings have an advanced polymer resin cage.

These bearings are available in both standard and open style. The open style incorporates bottom plates and mounting screws to keep bushings securely in place.

We also offer a complete range of slide units, which act as housings for the slide bushings; these come predrilled and ready for mounting as needed.

Available Dimensions:

Shaft Diameter (dr): 0.25 in. to 2 in.

Outer Diameter (D): 0.5 in. to 3 in.

Length (L): 0.75 in. to 4 in.

Distance Between Retaining Rings (B): 0.515 in. to 3.206 in.

Retaining Ring Width (W): 0.0390 in. to 0.1029 in.

Retaining Ring Diameter (D1): 0.4687 in. to 2.8379 in.

Dynamic Load (C): 60 lb to 2430 lb

Static Load (Co): 80 lb to 3040 lb

Configuration: Both open and standard types are available.  

Seal Type: Seals on both ends are available, as well as no seals.

26 - 32 of 32 | Results Per Page | View | Unit of Measure
1 2 

Item #

(dr) Shaft Diameter

(D) Outer Diameter

(L) Length

(B) Distance btwn Retaining Rings

(W) Retaining Ring Width

(D1) Retaining Ring Diameter

(C) Dynamic Load

(Co) Static Load

Configuration

Seal Type

Sort by
N/A 0.5000 in N/A 0.8750 in N/A 1.250 in N/A 1.032 in N/A 0.0459 in N/A 0.8209 in N/A 230 lb N/A 290 lb N/A Standard Type N/A Seals on Both Ends
N/A 0.5000 in N/A 0.8750 in N/A 1.250 in N/A 1.032 in N/A 0.0459 in N/A 0.8209 in N/A 230 lb N/A 290 lb N/A Open Type N/A No Seals
N/A 0.5000 in N/A 0.8750 in N/A 1.250 in N/A 1.032 in N/A 0.0459 in N/A 0.8209 in N/A 230 lb N/A 290 lb N/A Open Type N/A Seals on Both Ends
N/A 0.375 in N/A 0.6250 in N/A 0.875 in N/A 0.703 in N/A 0.0390 in N/A 0.5880 in N/A 95 lb N/A 120 lb N/A Standard Type N/A No Seals
N/A 0.375 in N/A 0.6250 in N/A 0.875 in N/A 0.703 in N/A 0.0390 in N/A 0.5880 in N/A 95 lb N/A 120 lb N/A Standard Type N/A Seals on Both Ends
N/A 0.25 in N/A 0.5000 in N/A 0.750 in N/A 0.515 in N/A 0.0390 in N/A 0.4687 in N/A 60 lb N/A 80 lb N/A Standard Type N/A No Seals
N/A 0.25 in N/A 0.5000 in N/A 0.750 in N/A 0.515 in N/A 0.0390 in N/A 0.4687 in N/A 60 lb N/A 80 lb N/A Standard Type N/A Seals on Both Ends
26 - 32 of 32 | Results Per Page | View | Unit of Measure
1 2