All Categories > Linear Motion > SW Type Linear Motion Bearings > View Items Download PDF Download PDF Printable Page Email This Page Save To Favorites Please wait… SW Type Linear Motion Bearings Check up to five results to perform an action. Ideal for single-direction motion applications, these standard linear bushings are available in wide variety of shaft shapes and materials — chrome or stainless steel with either a steel or resin retainer. These bearings contain internal seals (UU), and the slide block housings are available in several styles. The SW series is available in standard, adjustable, or open style; open style incorporates bottom plates and mounting screws to ensure bushings remain in the proper position. Available Dimensions: Shaft Diameter (dr): 0.25 in. to 4 in. Outer Diameter (D): 0.5 in. to 6 in. Length (L): 0.75 in. to 8 in. Distance Between Retaining Rings (B): 0.511 in. to 6.258 in. Retaining Ring Width (W): 0.039 in. to 0.1389 in. Retaining Ring Diameter (D1): 0.4687 in. to 5.745 in. Dynamic Load (C): 206 to 14,100 CN Static Load (Co): 265 to 34,800 CoN Configuration: Open, standard, and adjustable types are available. Seal Type: Seals on both ends are available, as well as no seals. larger image larger image Results Per Page : 25 50 100 200 Results 51 - 55 of 55 Unit of Measure: Imperial 1 2 3 Item # (dr) Shaft Diameter (D) Outer Diameter Length Dist. Btwn Retaining Rings (W) Retaining Ring Width (D1) Retaining Ring Diameter (C) Dynamic Load (Co) Static Load Configuration Seal Type SW 48-AJ 3.0000 in 4.5000 in 6 in 4.726 in 0.12 in 4.31 in N/A N/A Adjustable Type No Seals SW 48-OP 3.0000 in 4.5000 in 6 in 4.726 in 0.12 in 4.31 in N/A N/A Open Type No Seals SW 64 4.0000 in 6.0000 in 8 in 6.258 in 0.1389 in 5.745 in N/A N/A Standard Type No Seals SW 64-AJ 4.0000 in 6.0000 in 8 in 6.258 in 0.1389 in 5.745 in N/A N/A Adjustable Type No Seals SW 64-OP 4.0000 in 6.0000 in 8 in 6.258 in 0.1389 in 5.745 in N/A N/A Open Type No Seals Results 51 - 55 of 55 1 2 3