Craft split bearings offer the benefits of conventional bearings with the added feature of easy assembly around a shaft. The complete assembly comes in halves to ease the installation, inspection, and replacement of pillow block bearings, which can be done without removing or disrupting other elements of the system.

The external self-aligning cartridges and housings are machined from ductile iron for greater tensile and yield strength, and the coating is baked on instead of painted for greater resistance against elements and chemicals. In addition, all materials meet or exceed the standards set by the American Bearing Manufacturers Association (ABMA).

Same-day shipping is available for bore sizes 1.4375 in. through 12 in. Float (FL) bearings and held (HD) bearing types are available.

Available Dimensions:

Shaft Diameter (d): 1.4375 in. to 6 in.

Pedestal Housing: PH 1 to PH 10

Center Height (A): 2.375 in. to 7.125 in.

Overall Length (B): 9 in. to 22 in.

Width (C): 2.375 in. to 7 in.

Minimum Bolt Dist. (E): 6.75 in. to 19 in.

Maximum Bolt Dist. (F): 7.5 in. to 20 in.

Height (H): 5.5 in. to 16.25 in.

1 - 25 of 66 | Results Per Page | View | Unit of Measure
1 2 3 

Item #

(d) Shaft Diameter

Pedestal Housing

(A) Center Height

(B) Overall Length

(C) Width

(E) Minimum Bolt Dist.

(E) Maximum Bolt Dist.

(H) Height

S1 BCH 107 N/A 1.4375 in N/A PH 1 N/A 2-3/8 in N/A 9 in N/A 2-3/8 in N/A 6-3/4 in N/A 7-1/2 in N/A 5-1/2 in
S1 BCH 108 N/A 1.5 in N/A PH 1 N/A 2-3/8 in N/A 9 in N/A 2-3/8 in N/A 6-3/4 in N/A 7-1/2 in N/A 5-1/2 in
S1 BCH 40mm N/A N/A PH 1 N/A 2-3/8 in N/A 9 in N/A 2-3/8 in N/A 6-3/4 in N/A 7-1/2 in N/A 5-1/2 in
S1 BCH 111 N/A 1 11/16 in N/A PH 2 N/A 2-3/4 in N/A 10-5/8 in N/A 2-3/8 in N/A 8 in N/A 8-7/8 in N/A 6-1/4 in
S1 BCH 112 N/A 1 3/4 in N/A PH 2 N/A 2-3/4 in N/A 10-5/8 in N/A 2-3/8 in N/A 8 in N/A 8-7/8 in N/A 6-1/4 in
S1 BCH 115 N/A 1 15/16 in N/A PH 2 N/A 2-3/4 in N/A 10-5/8 in N/A 2-3/8 in N/A 8 in N/A 8-7/8 in N/A 6-1/4 in
S1 BCH 200 N/A 2 in N/A PH 2 N/A 2-3/4 in N/A 10-5/8 in N/A 2-3/8 in N/A 8 in N/A 8-7/8 in N/A 6-1/4 in
S1 BCH 45mm N/A N/A PH 2 N/A 2-3/4 in N/A 10-5/8 in N/A 2-3/8 in N/A 8 in N/A 8-7/8 in N/A 6-1/4 in
S1 BCH 50mm N/A N/A PH 2 N/A 2-3/4 in N/A 10-5/8 in N/A 2-3/8 in N/A 8 in N/A 8-7/8 in N/A 6-1/4 in
S1 BCH 203 N/A 2 3/16 in N/A PH 3 N/A 3- 5/32 in N/A 11 in N/A 2-3/4 in N/A 8-7/8 in N/A 9-1/2 in N/A 7 in
S1 BCH 204 N/A 2 1/4 in N/A PH 3 N/A 3- 5/32 in N/A 11 in N/A 2-3/4 in N/A 8-7/8 in N/A 9-1/2 in N/A 7 in
S1 BCH 207 N/A 2 7/16 in N/A PH 3 N/A 3- 5/32 in N/A 11 in N/A 2-3/4 in N/A 8-7/8 in N/A 9-1/2 in N/A 7 in
S1 BCH 208 N/A 2 1/2 in N/A PH 3 N/A 3- 5/32 in N/A 11 in N/A 2-3/4 in N/A 8-7/8 in N/A 9-1/2 in N/A 7 in
S1 BCH 60mm N/A N/A PH 3 N/A 3- 5/32 in N/A 11 in N/A 2-3/4 in N/A 8-7/8 in N/A 9-1/2 in N/A 7 in
S1 BCH 65mm N/A N/A PH 3 N/A 3- 5/32 in N/A 11 in N/A 2-3/4 in N/A 8-7/8 in N/A 9-1/2 in N/A 7 in
S1 BCH 211 N/A 2 11/16 in N/A PH 4 N/A 3-3/4 in N/A 13 in N/A 3 in N/A 10-1/4 in N/A 11 in N/A 7-7/8 in
S1 BCH 212 N/A 2 3/4 in N/A PH 4 N/A 3-3/4 in N/A 13 in N/A 3 in N/A 10-1/4 in N/A 11 in N/A 7-7/8 in
S1 BCH 215 N/A 2 15/16 in N/A PH 4 N/A 3-3/4 in N/A 13 in N/A 3 in N/A 10-1/4 in N/A 11 in N/A 7-7/8 in
S1 BCH 300 N/A 3 in N/A PH 4 N/A 3-3/4 in N/A 13 in N/A 3 in N/A 10-1/4 in N/A 11 in N/A 7-7/8 in
S1 BCH 70mm N/A N/A PH 4 N/A 3-3/4 in N/A 13 in N/A 3 in N/A 10-1/4 in N/A 11 in N/A 7-7/8 in
S1 BCH 75mm N/A N/A PH 4 N/A 3-3/4 in N/A 13 in N/A 3 in N/A 10-1/4 in N/A 11 in N/A 7-7/8 in
S1 BCH 303 N/A 3 3/16 in N/A PH 5 (2B) N/A 4-13/32 in N/A 15 in N/A 3-1/2 in N/A 12-7/16 in N/A 13-3/8 in N/A 10 in
S1 BCH 304 N/A 3 1/4 in N/A PH 5 (2B) N/A 4-13/32 in N/A 15 in N/A 3-1/2 in N/A 12-7/16 in N/A 13-3/8 in N/A 10 in
S1 BCH 30/ N/A 3 7/16 in N/A PH 5 (2B) N/A 4-13/32 in N/A 15 in N/A 3-1/2 in N/A 12-7/16 in N/A 13-3/8 in N/A 10 in
S1 BCH 308 N/A 3 1/2 in N/A PH 5 (2B) N/A 4-13/32 in N/A 15 in N/A 3-1/2 in N/A 12-7/16 in N/A 13-3/8 in N/A 10 in
1 - 25 of 66 | Results Per Page | View | Unit of Measure
1 2 3