Craft split bearings offer the benefits of conventional bearings with the added feature of easy assembly around a shaft. The complete assembly comes in halves to ease the installation, inspection, and replacement of pillow block bearings, which can be done without removing or disrupting other elements of the system.

The external self-aligning cartridges and housings are machined from ductile iron for greater tensile and yield strength, and the coating is baked on instead of painted for greater resistance against elements and chemicals. In addition, all materials meet or exceed the standards set by the American Bearing Manufacturers Association (ABMA).

Same-day shipping is available for bore sizes 1.4375 in. through 12 in. Float (FL) bearings and held (HD) bearing types are available.

Available Dimensions:

Shaft Diameter (d): 1.4375 in. to 6 in.

Pedestal Housing: PH 1 to PH 10

Center Height (A): 2.375 in. to 7.125 in.

Overall Length (B): 9 in. to 22 in.

Width (C): 2.375 in. to 7 in.

Minimum Bolt Dist. (E): 6.75 in. to 19 in.

Maximum Bolt Dist. (F): 7.5 in. to 20 in.

Height (H): 5.5 in. to 16.25 in.

Type E units provide combination of high radial and thrust loads as well as ease of installation and positive locking to the shaft. Factory installed labyrinth seals effectivelly seal against loss of lubricant and admission of dust and dirt. Timken tapered roller bearings are supplied on all units.

Type E units provide combination of high radial and thrust loads as well as ease of installation and positive locking to the shaft. Factory installed labyrinth seals effectivelly seal against loss of lubricant and admission of dust and dirt. Timken tapered roller bearings are supplied on all units.

These units provide high radial and thrust loads as well as ease of installation and positive locking to the shaft. Factory-installed labyrinth seals effectively prevent loss of lubricant and admission of dust and dirt.

The piloted flange, which offers increased control over misalignment, is an ideal choice for applications in which the majority of the housing is recessed.

Constructed from premium-quality cast iron and steel, these bearings enhance machinery longevity while maintaining exceptional uptime and productivity. Timken-tapered roller bearings are supplied on all units for a 12-percent higher load capacity and a 47-percent increase in bearing life.

Available Dimensions:

Shaft Size: 1.75 in. to 5 in.

Dimension (A): 3.5 in. to 7.25 in.

Dimension (B): 6.375 in. to 14.75 in.

Dimension (C): 2.90625 in. to 5.0625 in.

Dimension (D): 5.375 in. to 12.75 in.

Number of Mounting Holes: 4 to 6

Optional Features: Optional seals provide additional protection; Nitrile V-Guard is ideal for high-moisture and multiple-contaminant environments, while Teflon and balanced labyrinth seals are well-suited to high-speed applications.

These units provide high radial and thrust loads as well as ease of installation and positive locking to the shaft. Factory-installed labyrinth seals effectively prevent loss of lubricant and admission of dust and dirt. Timken-tapered roller bearings are supplied on all units for a 12-percent higher load capacity and a 47-percent increase in bearing life.

These models feature interchangeable mounting dimensions with ball bearing units, allowing for an easy way to upgrade from ball bearings. They can accommodate grease temperatures of up to 250 degrees Fahrenheit; high-temperature units also available that can handle grease as hot as 350 degrees Fahrenheit.

Available Dimensions:

Shaft Size: 1.1875 in. to 4.5 in.

Dimension (A): 2.8125 in. to 7.09375 in.

Dimension (B): 3.75 in. to 10.875 in.

Dimension (C): 2.59375 in. to 5.9375 in.

Dimension (D): 2.875 in. to 8.75 in.

Weight: 4.5 lb to 96 lb

Optional Features: Special Coatings are available to provide optimal corrosion resistance.

Type E units provide combination of high radial and thrust loads as well as ease of installation and positive locking to the shaft. Factory installed labyrinth seals effectivelly seal against loss of lubricant and admission of dust and dirt. Timken tapered roller bearings are supplied on all units.

Our M2000 units, with spherical roller bearings, offer high load capacity while allowing for angular misalignment. These units come pre-lubricated and shaft ready for quick and easy installation.                   

The M2000 series is directly interchangeable with SYR and ZA units. Available in both expansion and non-expansion styles with triple-lip or labyrinth seals, these units are made of class 30 cast iron.

Available Dimensions:

Shaft Size: 1.1875 in. to 4 in.

Dimension (A): 2.8125 in. to 4.75 in.

Dimension (B): 6.375 in. to 14.5 in.

Dimension (C): 2.1875 in. to 3.5625 in.

Dimension (D): 4.75 in. to 10.875 in.

Dimension (M): 1.75 in. to 4.125 in.

Weight: 6.5 lb to 45 lb

Configuration: Both expansion and non-expansion configurations are available.

M2000 units, with spherical roller bearings, offer high load capacity while allowing for angular misalignment. Available in expansion and non-expansion styles with triple lip or labyrinth seals. Directly interchangable with SYR and ZA units.

M2000 units, with spherical roller bearings, offer high load capacity while allowing for angular misalignment. Available in expansion and non-expansion styles with triple lip or labyrinth seals. Directly interchangable with SYR and ZA units.

M2000 units, with spherical roller bearings, offer high load capacity while allowing for angular misalignment. Available in expansion and non-expansion styles with triple lip or labyrinth seals. Directly interchangable with SYR and ZA units.

M2000 units, with spherical roller bearings, offer high load capacity while allowing for angular misalignment. Available in expansion and non-expansion styles with triple lip or labyrinth seals. Directly interchangable with SYR and ZA units.